IRISNDT inspects as-fabricated pressure vessels and piping welds routinely in fabrication shops and within plants. We also use radiography shadow shots to consistently inspect process piping, pressure vessels and valves for metal losses. We provide an easily viewed and permanent record of the inspected component.
Radiography is a non-destructive test method that utilizes electromagnetic energy (radiation) from X-rays or gamma rays; it detects both surface and internal discontinuities. Radiographs are two-dimensional negative images (projections) of objects on radiation sensitive films/plates.
Cobalt 60 and Iridium 192 are the more commonly used industrial gamma ray sources. The practical thickness limit for carbon steel gamma radiography is approximately 2.5″ for Iridium 192 and 9″ for Cobalt 60. Se-75 gamma radiography is used to inspect thin wall small diameter butt welds. Se-75 is excellent for congested work sites since much smaller restricted areas are required. Se-75 has a practical thickness limit for steel of approximately 0.75”.
Safety is a fundamental consideration when using radiation. Clearance of large areas adjacent to the component from persons or items that may be affected by radiation is required. A significant radiation dose can cause physical changes in the human body. Strict Federal and Provincial regulations, coupled with highly trained and qualified personnel ensure the safety of everyone.
Test results are interpreted in accordance with specifications or customer requirements. The customer receives the final radiographic film, a report and drawings (if required) identifying the location of discontinuities.
Address your integrity concerns with confidence. Our expert team is dedicated to providing precise and reliable solutions that safeguard the integrity of your assets, ensuring long-term success and compliance.
© IRISNDT All Rights Reserved.